Cisco TelePresence MX200 G2 Installation Manual page 3

Installing Cisco TelePresence MX200 G2 - Wheel Base
1
Mount the wheel base
A
78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
You may place the column on the empty
wheel base box as illustrated. Then it is
easier to enter the screws from below.
Optional
4 × M6x20
It is possible to replace the wheels with rubber pads.
The rubber pads are kept underneath the wheel
base, and must be moved to their correct position.
M5x8 (Allen key, 3 mm)
1 4 ×
2
3
3