Table of Contents
Advertisement
Installation
Warning
• Do not leave the lens facing the sun.
The sunlight enters through the lens and focuses inside
the camera and will lead to a fire accident.
• Attach the lens in the exact way described in this
document. Loose attachment may lead to injury due to
the lens falling off. Check that the attachment is not
loose at least once a year. Perform more frequent checks
depending on the usage.
• Full performance may not be achieved depending on the
installed circumstance or lens. Please contact Sony for
details.
Mounting the lens
Mounting/removing of the lens should be performed after
turning the camera "OFF".
1
Remove the body cap from the camera and the lens
rear cap from the lens.
• Perform this operation in a dustless place in a quick
manner to prevent the dust getting into the camera.
• Remove the lens front cap on the front side of the
lens when you shoot.
Lens front cap
Lens rear cap
2
Align two white dots on the lens and camera, then
engage.
• Face the mount downward to prevent dust from
getting in.
Body cap
3
Push the lens to the camera softly, then rotate it in the
direction of the arrow until it clicks.
• Do not insert the lens at a tilted angle.
Notes
• When you mount the lens, do not press the Lens release
button.
• Do not apply any force on the lens.
• Hold securely for both the camera and lens when you
carry the camera with a lens mounted.
• Do not hold the camera holding the lens part that juts out
when zooming or focusing.
• Zoom lens use
Zoom position may be changed depending on the
installed circumstances.
Make sure to secure the zoom ring by applying tape as
necessary.
Recommended tape: 3M Scotch
Model No. 471 BLA 50 equivalents
Apply the tape on the zoom ring full circle to fix.
To remove the lens
1
Rotate the lens in the direction of the arrow until it
stops by pressing the Lens release button, then
remove.
Lens release button
6
®
plastic film tape
Zoom ring
Tape
Advertisement
Table of Contents
