Indesit tcud93b Service Information page 35

Indesit Company
J. Door Switch
1. Remove the top cover as in (A).
2. Remove the console as in (C).
3. Depress the locking tab securing the switch to the front panel and remove the switch.
K. Rear Bearing (Tear Drop shaped)
1. Remove the rear bearing cover.
2. Remove the drive pin and collar.
3. Remove the tear drop bearing fixing
screw.
4. Slide the bearing off the drum shaft.
L. Pump & Float Switch
1. Release the two pump/float assembly cover clips. See Photos 1 and 2.
Photo 1
2. Release the two clips at either end of the pump/float assembly and lift the unit clear.
Photo 3
Service Manual UK
Photo 2
Shown with cover removed
35 of 37
Teardrop Bearing
fixing Screw
Released Clips
English