Fault Codes - Led Models - Indesit tcud93b Service Information

Indesit Company
FAULT CODES - LED Console Models Only
When the machine's Electronics detect a fault:
> All of the Option and Start Led's will Flash Rapidly.
> The machine will continue with Drum Action only for a further 20 minutes.
> The Progress/Warning Lamps will illuminate (continually "ON") to display the relevant Fault Code
FAULT
F01 Motor triac in short circuit or Relay of
motor welded closed
F02 Blocked motor (fan blocked).
F03 Front NTC open or short circuit
F04 Pump working when should be off.
F05 Pump not working when should be on.
F06 Non used, active
F07 Lower element failure
F08 Static heater relay welded closed
F09 Error set-up file. EEPROM is not
programmed or not functioning
F10 Common of heater open, one shot open
F11 Pump open circuit.
F12 No communication between display
board and control board
F13 Rear NTC open or short circuit.
F14 Upper element failure
F15 Dynamic (PD) heater relay welded closed
F16 Not used, active
F17 Master relay welded closed
For additional Fault Code information see following pages.
Service Manual UK
CAUSE
27 of 37
LED 5
LED 4
LED 3
LED 2
LED 1
Option & Start LED's
will all flash together
when a fault code
is displayed
STATUS OF LEDs
LED COMBINATION
5 4 3
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON ON
OFF ON ON
OFF ON ON
OFF ON ON
ON OFF OFF
ON OFF OFF
2 1
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
English