Scanning Documents; Scanning Via Twain Interface - Ambir ImageScan Pro 930u User Manual

S D
CANNING
There are three different ways to operate the scanner when scanning
documents:
1. By acquiring images from the scanner into a TWAIN-compliant
application through our TWAIN software interface.
2. By scanning from the buttons on the scanner front panel.
3. By scanning from AmbirScan ADF Execute menu on the screen.
The TWAIN interface and AmbirScan ADF software are automatically
installed to your system along with the scanner driver.
Attention

Scanning via TWAIN Interface

The TWAIN program is a very important piece of software that comes with
your scanner. This program acts as an interface between the scanner
hardware and the image-editing software you are using to view and edit
images. The TWAIN program allows you to adjust a number of settings to define
the quality of the scanned image.
The following describes how you may use our bundled application (NewSoft
Presto! PageManager 9) to scan via TWAIN interface. When you get familiar
with the scanning, you may alternatively use other TWAIN compatible scanning
program or image-editing application to do your scanning projects.
Scan within NewSoft Presto! PageManager 9:
1. Click the Windows Start button to launch Presto! PageManager 9.
OCUMENTS
Before you
following:
Your computer and scanner are both

turned on.
The

system tray.
Paper is properly loaded into the ADF.

start scanning,
icon appears on the Windows
check the
25