Allnet ALL0235NANO Quick Installation Manual

Wireless n 150mbit usb-mini-pen adapter

Download this manual

ALL0235NANO

Wireless N 150Mbit

USB-Mini-Pen Adapter

Quick Installation Guide

Need help?

Do you have a question about the ALL0235NANO and is the answer not in the manual?

Page 1 ALL0235NANO Wireless N 150Mbit USB-Mini-Pen Adapter Quick Installation Guide...
Page 2: Automatic Installation
1) Automatic Installation Plug the ALL0235NANO into a free USB port on your PC or laptop. Open Network and Internet / Network and Sharing Center / Manage network connections and check if the ALL0235NANO will be installed automatically.(This may take up to 1 minute.) If the ALL0235NANO stick appears you can search for wireless networks around by open "Connect / Disconnect"...
Page 3 The following instructions show installation with Windows 7. The procedure for Windows 8.1 / 8 / XP is mostly the same. Insert the Driver-CD into your CD drive and run „Ralink_3x7x_5x7x_76xx_20140423.exe“ Click on Install next. - 2 - © ALLNET GmbH München 2014 - Alle Rechte vorbehalten...
Page 4 The next window show you the installations status bar. When the Line goes full green the installation is done. After this installation, open Network and Internet / Network and Sharing Center / Manage network connections. - 3 - © ALLNET GmbH München 2014 - Alle Rechte vorbehalten...
Page 5 In addition to the LAN connection a new adapter is listed called "Wireless Network Connection" or "Wifi adapter". Click on the "Wireless Network Connection" with a right click and open "Connect / Disconnect". - 4 - © ALLNET GmbH München 2014 - Alle Rechte vorbehalten...