!
!
Service
Service
Information
Information
Philips Domestic Appliances and Personal Care
Service Manual
HINTS FOR REPAIRS
- Remove the shaving unit, to prevent damages
during repairs.
- Remove screws A1 (2x, of which 1 is under
trimmer slide).
- Take cover with trimmer from housing.
- Remove bracket (14 + 21).
- The PC-board can now be removed from the
housing.
- Remove screws B1 (2x) the motor and
hairchamber can now be removed from the
housing.
- Detach the motor clamping spings (item 17) on
the bearing block with a small screwdriver.
GENERAL
• Mainsshaver possible.
• Converts input voltage 8-16V dc to constant
Charge current (NiMH 1100mA, NiCd 680mA)
or Constant motorvoltage at mainsshave.
Start-up voltage min. 11V.
• Open battery protection.
• Undervoltage protection.
• Charging time is determined by
Temperature (absolute or delta).
• Green mains LED (input voltage present).
• Electronic on/off.
Published by Philips Domestic Appliances and Personal Care
4322 277 00133
02/12
TECHNICAL DATA
Voltage
Power consumption
Motor voltage
Power supply
Speed of cutters
Shaving heads
Battery
SAP CODING : 8856 825 99999
This product meets the requirements regard-
ing interference suppression on radio and TV.
After the product has been repaired, it should
function properly and has to meet the safety
requirements as offi cially laid down at this
moment.
Printed in the Netherlands
© Copyright reserved
Shaver
HQ6825/A
QUADRA ACTION
: 100-240 V 50/60Hz
: Motor depending
: 2.4 V
: SMPS
: > 2100 r.p.m.
: HQ6 - 4822 690 10214
: Green NiCd pack AA
Subject to modification