Setting Operating Parameters - Branson 1510 Operator's Manual

NOTE:
lfthis is the first lime you are rlnning the cleaner. or if you have chang€c
cleaning solution, you must degas the solution lf not, move to Sett/tg
Operatihg Paamelers.
Action
Degas for 5-10 minutes. lf necessary, use SET/CLEAR
DISPLAY to alter this setting. Default degas time is 5 minutes
NOTE: Reter to 17 for information on d
Pe.ameters
12 Oporating Your Cloener
The cleaner is now in Sel Time mode with a
defaull lme of 60 mins. lf necassary, use
SETi CLEAR DISPLAY to alter this setting.
Press ON/OFF once to activate limed
uMasonrcs.
To set the tank temperature, press SELECT
OPTION untilthe SET TEMP LED lights. Then
press SET DISPLAY to alter th€ setting until the
LED display indicates the tank temperalure you
wish io maintain. Press ON/OFF once to
activate heat. The heat indicator li
To monitor the solution temperature, press
SELECT OPTION untillhe SOLUTION TEMP
LED lghts The LED drsplay wll Indicate the
actua temoeralure of lhe so ulion.