Belors You S'in Cteanlng
Action
Select your cleaning solution (referto page 23lor solution
effecls on metals).
Allowing for the volume of the pads you will b€ cleaning and
cleaning solution, fill lhe tank wth wam tap water to the
level line (one Inch from the
Add cleanrno solution to the tank wal€r.
Plua the cleaner into a
d6d outlet.
For maximum efficiency, refer to page 16, 'Optimizing Your
Cleaner" b€fore
NOTE:
lf this is the first time you are running the clsaner, or if Jlou have changed
cleanhg solution. you must degas lhe solution. lf not, skip to "Crertrrg
Itams"
t Operating Your Clcaner
s,
ffi
! crurror !
. Do not place parts or containers directly on the botlom of the cleaning
lanks; use a lray or whe to suspend atems.
. Do not allow th€ solution to drop rnore than 3/8 inch below the
operating level line with th€ cleaner on.
. Do not ever use alcohol, gasoline or flammable solutions. Doing so
could cause a fire or explosion. Use only water-based solutions.
. Do nol ever use mineral acids. These could damag€ lhe tank.
Failure to comply with these cautions wrllvoid your warranty.