Removing The Fork Legs - MOTO GUZZI Griso1200 8V Service Station Manual

Suspensions
FOR ADJUSTMENT, ALWAYS START FROM THE MOST
RIGID SETTING (SET SCREWS (1 - 2) FULLY CLOCKWISE).
USE THE NOTCHES ON SET SCREWS (1 - 2) AS REFER-
ENCES TO ADJUST HYDRAULIC COMPRESSION AND RE-
BOUND DAMPING.
TURN THE SET SCREWS (1 - 2) GRADUALLY BY 1/8 OF A
TURN AT A TIME.
Specification
Standard rebound damping adjustment, screw (1)
Hydraulic rebound damping adjustment for sports use, screw
(1)
Standard compression damping adjustment, screw (2)
Hydraulic compression damping adjustment for sports use,
screw (2)
Spring preloading, nut (3)
Stems (A) protrusion from top plate (excluding cover) (standard
adjustment)
Stems (A) protrusion from top plate (excluding cover) (sports
use adjustment)
(*) = clockwise
(**) = anticlockwise

Removing the fork legs

•
Remove the front mudguard.
•
Remove the brake callipers.
•
Support the fork stem and loosen the
screws on the upper and then the lower
plate.
•
Remove the fork stem.
SUSP - 190
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
F
RONT FORK ADJUSTMENT
open (**) 1,5 click from fully closed (*)
Open (**) 0.5 - 1 turn from fully closed (*)
open (**) 1 click with fully closed (*)
Open (**) 0.5 - 1 turn from fully closed (*)
Open (**) 4 - 5 protrusion notches from fully closed (*)
Take your vehicle only to a Moto Guzzi Official Dealer for this
Take your vehicle only to a Moto Guzzi Official Dealer for this
GRISO 8V - 1200
Desc./Quantity
4 protrusion notches
type of adjustment.
5 protrusion notches
type of adjustment.