Quick-Diagram - Electrolux T4290 Programming Manual

Quick-diagram

Group 0
Adjustable parameters:
0 01 High temperature
0 02 Medium temperature
0 03 Low temperature
0 04 No heat (option)
0 05 Discount (coin only)
0 06 Time per push or coin 1
0 07 Time per coin 2
0­08­­ Min.­time­before­start­(coin­only)
Note!
If a mistake is made or confusion arises while
programming the dryer, press the service button
and start again.
During the programming process, Enter is used to
save new settings.
If you leave programming mode before pressing
Enter to save a new setting, the original value will
be retained.
Programming
Main groups
Group 0 - Temperature / drying time
Group 1 - Reading total counters
Group 2 - Code to area B
Area B see service manual
Selecta Control from ver. 4.01
Group 1
Readable parameters:
1 01 Hour counter - permanent
1 02 Hour counter - resettable
1­03­ Hours­until­next­service
1 04 Total coins inserted, coin 1
1 05 Total coins inserted, coin 2
9
Subgroups
0 01 - 0 08
1 01 - 1 05