14
Error codes overview
Error
Description
code
E 01
Not in use
E 02
Not in use
E 03
The input sensor has short circuited
The thermistor that measures air temperature at the drum inlet or the wires running to
the sensor has short circuited.
E 04
The output sensor has short circuited
The thermistor that measures air temperature at the drum outlet or the wires running
to the sensor has short circuited.
The fan motor has overheated (Motor 1)
E 05
The heat protection contact in the motor, or its cable stem, is open.
E 06
The drum motor has overheated (Motor 2)
The heat protection contact in the motor, or its cable stem, is open.
E 07
External error
E 08
Machine overheated
Protectionthermostatsforinletandoutletair.
One of the protection thermostats has opened due to overheating.
E 09
Filter lid open
E 10
Incorrect programming
One or more parameters are incorrect or is missing.
E 11
Drying error with RMC program
ThelongestpermittedRMCtimehasbeenexceeded.
(AppliesonlytomachineswithRMC).
E 12
Drying error with autostop program
Thelongestpermittedautomaticstoptimehasbeenexceeded.
(Appliesonlytomachineswithautomaticstop).
E 13
Drying error with time program
Thesetdryingtimeislongerthanlongestpermitted.
(Appliestotumbledryersthatareconnectedtoapaymentsystem).
E 14
Gas error, push gas reset button
Noflamehasbeendetected.(Appliesonlytogasheatedtumbledryers).
E 15
No vacuum detected
The vacuum/pressure switch does not close within 12 seconds of the tumble
dryerstarting.
E 16
Vacuum sensor has short circuited
The vacuum/pressure switch was already closed when an attempt was made
tostartthetumbledryer.
E 17
The input sensor has disconnected
Theinletthermistor,oritswires,isopen.
E 18
The output sensor has disconnected
The outlet thermistor, or its wires, is open.
Programming