Jumper Setup - ASROCK D1541D4I-2L2T User Manual

2.5 Jumper Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper
is "Open". The illustration shows a 3-pin jumper whose pin1 and pin2 are "Short"
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
SATA DOM Power
Jumper
(3-pin SATAPWR1)
NCSI Mode Jumper
(3-pin NCSI_SEL1)
*Supports D1541D4I-2L2T only
CPU PECI Mode Jumper
(3-pin PECI1)
20
Normal Mode (Default)
SATA DOM (SATA_4)
requires 5V power supply
NCSI is set LAN1 (i210)
(Default)
CPU PECI connected to PCH CPU PECI connected to
ME Recovery Mode
Normal SATA (Default)
SATA DOM (SATA_4) does
NOT require 5V power
supply
NCSI is set to LAN3 (X557)
BMC
(Default)