2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.
*You can see p.6~8 for motherboard layout.
Serial ATA3 Connectors
(SATA_4)
(SATA_5)
Serial ATA3 DOM
Connector
(SATA_4)
Mini SAS Connector
(SATA_0_3)
USB 2.0 Header
(4-pin USB_1)
SATA_4
SATA_5
SATA_4
1
GND
P+0
P-0
USB_PWR
D15X1D4I Series
These two Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
The SATA3 DOM
connector supports
both a SATA DOM
(Disk-On-Module) and
a SATA data cable for
internal storage device.
This connector supports
MiniSAS-to-SATA or
MiniSAS-to-MiniSAS
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. Each connector is
used to connect to four
HDDs.
There is one USB 2.0 header on
this motherboard, and it can
support one USB 2.0 port.
21