Table of Contents
Advertisement
Basic Operation
Standby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby
mode. The POWER Indicator will light up red.
Press the
/SOURCE button on the main unit or the
switch the main unit on. The status indicator of the last used mode will light up.
Press and hold the
remote control to switch the main unit back to Standby mode. The POWER Indicator will
light up red.
Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.
-
When the unit volume is close to mute or is idle for approximately 15 minutes, it will
automatically switch to Standby mode.
Select Modes
Press the
/SOURCE button on the main unit or the SOURCE button on the remote control
repeatedly to switch between AUX, MP3 LINK, OPTICAL and BLUETOOTH mode.
When AUX mode is selected, the AUX/MP3 LINK Indicator will light up steadily.
When MP3 LINK mode is selected, the AUX/MP3 LINK Indicator will flash.
Adjust the Volume
Press the VOL +/– button to adjust the volume.
If you wish to turn the sound off, press the MUTE button on the remote control. Press the
MUTE Button again or press the VOL +/- button to resume normal listening.
While adjusting the volume, the status indicator ashes quickly.
While the volume level reaches its maximum level, if you press the VOL + button again, the
status indicator ashes once. While the volume level reaches its minimum level, if you press
the VOL – button again, the status indicator ashes once.
Select a Preset Sound Effect
While playing, press the EQ button on the remote control to select between preset equalisers:
Movie (recommended for viewing movies), Music (recommended for listening to music) and
FLAT setting (EQ mode off ).
For Movie/Music LED indicator
Movie EQ : Light up steadily.
Music EQ: Light flash.
FLAT mode: Light turn off.
/SOURCE button on the main unit or press the
10
button on the remote control to
button on the
Advertisement
Table of Contents
