Pyle PSBV250BT User Manual page 6

Remove the screws from the main unit.
Drill 2 parallel holes (Ø 3-8 mm each according
to wall type) in the wall. The distance between
the holes should be 720 mm.
W a l l
Leave a 5 mm gap between the wall and the screw's head. Lift the unit with the attached wall
brackets over the heads of the screws and slot into place.
Attach the wall brackets to the main unit with
the screws removed from the main unit.
Wall bracket
Firmly fix 1 dowel into each hole in the wall
if necessary.
Dowel
5
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
Screws
5 mm
25-30 mm