Table of Contents
Advertisement
SECTION V ACCESSORIES
MODEL 6101 ACCESSORY PROBE:
The Model 6101 probe consists
of an Input
connector,
3 feet
of
low noise cable and a shielded
probe head.
Its purcose
is to
allow
convenient
connection
to the electrometer
input.
MODEL 6102 - 1O:l DIVIDER PROBE:
The Model 61G2 divider
probe is :&ended
for
general
purpose
measurements where an extension
of the upper voltage
range of
the 610 is desired.
The division
ratio
is 1O:l correct
to 1%
and the probe input
resistance
is 1010 ohms.
The probe is
supplied
with
a mating
connector
and 3 feet
of cable.
MODEL 6103 - 1ooo:l
DIVIDER PROBE:
The Model 6103 probe is intended
for very high voltage
measure-
ments at high impedance.
The division
ratio
ia 1OOO:l correct
to 3% and the probe input
resistance
is 1012 ohms.
The probe
is supplied
with
a mating connector
and 3 feet
of cable.
MODEL 6104 TEST ADAPTER:
The Model 6104 Test Adapter
is intended
for use in making
measurements wherein
complete
shielding
of the component
under test
is required.
External
termtnals
are provided
for
either
grounded tests,
or a test
requiring
an external
voltage
source.
V -1
Advertisement
Table of Contents
