Headlights; High Beams; Flash-To-Pass; Parking Lights - Fiat 500 ABARTH 2017 Owner's Manual

86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Headlights

Rotate the end of the multifunction lever
upward to the first detent for headlight op-
eration.
Headlight Operation
NOTE: When the headlights are turned on, the Daytime
Running Lights will be deactivated.

High Beams

With the low beams activated, push the multi-
function lever towards the instrument panel to
turn on the high beams. Pull the multifunction lever
toward the steering wheel to turn off the high beams.

Flash-To-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward the steer-
ing wheel. This will turn on the high beams until the
lever is released.

Parking Lights

To turn on the parking lights, remove the key
or turn the ignition to OFF/LOCK position
and turn on the headlights.

Daytime Running Lights

To activate the Daytime Running Lights (DRL), rotate
the end of the multifunction lever to the O symbol.
NOTE: The low beams and side/taillights will not be
on with DRL.
If allowed by law in the country in which the vehicle
was purchased the DRL function can be turned on or off
using the display menus. Refer to "Uconnect Settings"
in "Understanding Your Instrument Panel" for further
information.