Engine Oil Change Reset; Evic Main Menu - Fiat 2016 500X Owner's Manual

162 GETTING TO KNOW YOUR INSTRUMENT CLUSTER
• OK Button
The OK button may be used for the following:
Select
Reset (hold)

Engine Oil Change Reset

Your vehicle is equipped with an engine oil change
indicator system. The "Change Engine Oil" message will
flash in the EVIC display for approximately 10 seconds
after a single chime has sounded to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent
upon your personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the MAR/RUN
position. To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure.
1. Turn the ignition switch to the MAR/RUN position.
(do not start the engine.)
2. Fully push the accelerator pedal slowly, three times
within 10 seconds.
3. Turn the ignition switch to the STOP/OFF position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

EVIC Main Menu

The Main Menu is composed of several options that can
be selected using the control buttons above.
I n f o r ma t i o n P r o v i d e d b y :