Table of Contents
Advertisement
Rear panel
•
¶
Legend:
¶
?
?
?
?
?
?
?
?
?
2–6
?
?
?
?
? ?
Figure 2-4: CBXSS Controller Box rear panel
Two Controllers
Controller 0 (left) and Controller 1 (right)
Host Interface Option
See
Host I/O Boards for CBXSS and CBXSL Controller Boxes on page
Fibre Channel Ports
See
Fibre Channel ports on page
PATH 0 Expansion Port
Connects to a DBS or DBL Drive Box. Do not connect to a DBX Drive Box.
LED above port shows when a link is made:
•
BLUE ON = Drive Box is connected and link status is normal.
•
ORANGE ON = a Hitachi Storage Navigator Modular 2 wizard indicates
that a SAS (ENC) cable must to be inserted into the port.
LAN 0 Maintenance Port
•
Left LED: Link Status (green)
•
Right LED: Port Activity (yellow)
See
Maintenance port on page
LAN 1 Management Port
•
Left LED: Link Status (green)
•
Right LED: Port Activity (yellow)
See
Management port on page
Power Unit
See
Power Unit for CBXSS, CBXSL, CBSS, and CBSL Controller Boxes on
page
2-45.
Main Switch
Powers the storage system ON and OFF. When power is OFF, turn on power
by holding this switch longer than 1 second. When power is ON, turn off
power by holding this switch longer than 3 seconds.
Reset Switch and Controller LEDs
Use the Reset switch only when instructed by Hitachi Support. For LEDs,
see
CBXSS/CBXSL controller LEDs on page
Uninterruptible Power Supply Port
Hardware description
Hitachi Unified Storage Hardware Service Guide
?
?
?
?
2-35.
2-37.
2-37.
2-34.
¶
?
?
? ?
?
?
?
2-38.
Advertisement
Table of Contents
