Drive I/O Module for CBL/CBLD Controller Box
The Drive I/O Module consists of two identical modules that each contain a
status LED and two connectors for attaching Drive Boxes.
Legend
¶
?
?
?
?
?
2–54
¶
?
?
?
?
Figure 2-35: CBL/CBLD Drive I/O Module
Component
Status LED
PATH 3 Drive Box Port
PATH 2 Drive Box Port
Link/Locate LED
PATH 1 Drive Box Port
PATH 0 Drive Box Port
Hardware description
Hitachi Unified Storage Hardware Service Guide
?
?
Color
Green
ON = power-on.
Red
ON = abnormal operating status. Visit the
HDS Support Portal at
Connector for connecting:
•
CBL to DBS/DBL/DBF/DBX/DBW.
•
CBLD to DBSD/DBLD.
Connector for connecting:
•
CBL to DBS/DBL/DBF/DBX/DBW.
•
CBLD to DBSD/DBLD.
Blue
ON = Drive Box is connected and link status
is normal.
Orange
ON = a Storage Navigator Modular 2 wizard
indicates that a SAS (ENC) cable must to be
inserted into the port.
Connector for connecting:
•
CBL to DBS/DBL/DBF/DBX/DBW.
•
CBLD to DBSD/DBLD.
Connector for connecting:
•
CBL to DBS/DBL/DBF/DBX/DBW.
•
CBLD to DBSD/DBLD.
¶
?
?
Description
portal.hds.com.