I/O Module (Enc), Dbf Drive Box; Cable Holder (Enc), Dbx - Hitachi CBXSS Hardware Service Manual

I/O Module (ENC), DBF Drive Box

Legend
¶
?
?
?
?

Cable Holder (ENC), DBX

Legend
¶
?
2–44
¶
?
LED Color
LOCATE Orange
ALARM Red
PWR Green
PATH (IN) Green
PATH (OUT) Green
LED Color
ALM Red
Blue
LOCATE Orange
Blue
Hardware description
Hitachi Unified Storage Hardware Service Guide
? ? ?
Description
ON when adding chassis with power turned on =
chassis is being added. This is not an error.
ON = CUDG or RAM error detected by ENC
firmware, or ENC error. Visit the HDS Support
Portal at portal.hds.com.
• Fast blinking 2 times: CUDG error in ENC.
• Fast blinking 3 times: firmware error in flash
memory.
ON = error with I/O Module (ENC) or I/O Card
(ENC), rendering the module or card unusable.
Visit the HDS Support Portal at portal.hds.com.
ON = AC power is being provided to the I/O Card
(ENC).
ON = IN port is linked.
ON = OUT port is linked.
¶
?
Description
ON = I/O Card (ENC) error. Visit the HDS Support
Portal at portal.hds.com.
ON = SAS IN side has made a link.
ON = CUDG, RAM, or I/O configuration error.
Visit the HDS Support Portal at portal.hds.com.
• High-speed blinking 2 times: CUDG error in
ENC card.
• High-speed blinking 3 times: firmware error
in flash memory.
ON = SAS OUT side has made a link.