Brother MFC-J6530DW Basic User's Manual page 56

Error Message
Out of Fax Memory Do one of the following:
Out of Memory
Paper Size
Mismatch
Paper Size
Mismatch [Tray
#1]
Paper Size
Mismatch [Tray
#2]
Paper Tray not
detected
Paper Tray #1 not
detected
Paper Tray #2 not
detected
Action
• Clear the data from the memory. To gain extra memory, you can
turn off Memory Receive.
For more information, see the Online User's Guide: Turn Off
Memory Receive.
• Print the faxes stored in the memory.
For more information, see the Online User's Guide: Print a Fax
Stored in the Machine's Memory.
If a fax-sending or copy operation is in progress:
• Press or Quit or Close and wait until the other operations
that are in progress finish, and then try again.
• Press Send Now to send the pages scanned so far.
• Press Partial Print to copy the pages scanned so far.
• Clear the data in the memory. To gain extra memory, you can turn
off Memory Receive.
For more information, see the Online User's Guide: Turn Off
Memory Receive.
• Print the faxes stored in the memory.
For more information, see the Online User's Guide: Print a Fax
Stored in the Machine's Memory.
1. Check that the paper size you selected on the machine's display
matches the size of the paper in the tray.
See Related Information: Change the Paper Size and Paper Type
at the end of this section.
2. Make sure you loaded the paper in the proper orientation and set
the paper guides at the indicators for your paper size.
See Related Information: Load Paper at the end of this section.
3. After you have checked the paper size and the paper orientation,
follow the LCD instructions.
If printing from your computer, make sure the paper size you selected
in the printer driver matches the size of paper in the tray.
For more information, see the Online User's Guide: Print Settings
®
(Windows ) or Print Options (Macintosh).
Slowly push the paper tray completely into the machine.
Paper or a foreign object has prevented the paper tray from being
inserted properly.
Pull the paper tray out of the machine, and remove the jammed paper
or foreign object. If you cannot find or remove the jammed paper, see
Related Information: Printer Jam or Paper Jam at the end of this
section.
42