2
Slide the manual feed slot paper guides
to fit the envelope width that you are
using.
3
Press the flaps, edges and corners of
the envelopes to make them as flat as
possible.
Fan the stack of envelopes well to avoid
paper jams and misfeeds.
4
Load only one envelope in the manual
feed slot with the printing surface face
up.
Push the envelope into the manual feed
slot until the front edge touches the
paper feed rollers. Let go of the
envelope when you feel the machine
pull it. The LCD displays [Manual
Feed Slot ready].
Read the instruction displayed on the
LCD, and then press [OK].
Portrait orientation
5
Pull out the paper support (1) until it
locks into place, and then unfold the
paper support flap (2).
If the document does not fit on one sheet,
the LCD will prompt you to load another
sheet of paper. Place another sheet of
paper in the manual feed slot, and then
press [OK].
Related Information
• Error and Maintenance Messages on
page 39
2
1
16