1.4.7 Item for Replacement/Cleaning_Test Print ID Table
imagePRESS C7000VP / imagePRESS C6000VP
The following table shows the combination of the test print ID in the list of replacement/cleaning items and the test print in the operator maintenance mode.
Follow this table to output a test print and check the image at the time of replacing or cleaning the parts.
Test print
ID
Y
1
Y
2
3
4
5
Y
6
Y
7
Y
8
9
Y
10
<Operator maintenance mode > adjustment/cleaning > test print screen>
Regarding test print 2
Do not allow an operator to use halftone 2 by their judgment (It is not needed for operator maintenance work (replacement/cleaning).
Halftone 2 serves to output a test print without image process and this test print is used to analyze when image failure (uneven density etc) appears on a normal
printing.
If using this function, contact a service division in sales company and follow an instruction.