Canon imagePRESS C7000 Series Operator Maintenance page 14

Chapter 1
(The exclusive control is applied to the operator maintenance modes for LUI and imagePRESS Server, both of which cannot be displayed at the same time.)
In order to display the operator maintenance, set '1' in the following service mode setting to enable the operator maintenance mode.
COPIER > OPTION > BODY > OPEMANT (level 2)
* For other setting information, see 'Installation Procedure'.
*1 The name varies between models
The counter value displayed on the operator maintenance mode and the data of mechanical system such as parts display setting are all displayed the value saved on
the controller of the machine. The same data of the mechanical system is used irrespective of either for LUI or for the external controller.
Operator maintenance mode (for Main Machine UI)
Enter the operator maintenance mode for Main Machine UI in Additional Function > Operator maintenance mode.
Operator maintenance mode (for imagePRESS Server)
To start the operator maintenance mode for the imagePRESS Server, select [Program] > [Canon OM App] > [Start OM App] in the Windows [Start] menu to
start the boot screen, and hold down [Display].
The application for the operator maintenance has not been installed in the imagePRESS Server. To display the screen of the operator maintenance for the imagePRESS
Server, the service technician should install the application for the operator maintenance to the imagePRESS Server at the time of the installation. (For the details of
operations, see 'Installation'.)
1-2
T-1-2
Main machine UI
ORP
F-1-2
Additional Functions
Common Settings
Timer Settings
Adjustment/Cleaning
Report settings
Voice Navigation
Settings
System Settings
F-1-3
T-1-3
Copy Settings
Communications
Settings
Mail Box Settings
Address Book Settings
Operator Maintenance
Mode
Done
System Monitor
imagePRESS
Server UI
Server UI