Canon imagePRESS C7000 Series Operator Maintenance page 18

Chapter 1
Installing the Flash Player
To display the installation procedure, Flash Player needs to be installed in an external controller (imagePRESS Server). Depending on the version of external
controller, it may not be installed at shipment so that engineers are expected to install the Flash Player in an external controller at installing the operator maintenance
as below.
ImagePRESS Server A3000/A2000: Without flash player installed
ImagePRESS Server A3100/A2100: With Flash Player installed (it is included in a system software).
A.Prearrange
1.imagePRESS Server
Install the operator maintenance application (OMApp) for imagePRESS Server into imagePRESS Server.
Refer to the Readme file in operator maintenance application (OMApp) for the installation procedure.
MEMO:
Operator maintenance application is not preinstalled in imagePRESS Server. To display the operator maintenance mode, service engineers need to install it in
imagePRESS Server.
Operator maintenance application will be provided to a field in the same way with a driver's update.
MEMO:
Description of Readme file
Installation/uninstallation procedure of operator maintenance application (OMApp)
- Points to note
The following 2 installers are included.
Follow the instruction to select the installer to use.
- In case that the old version OMApp has been installed:
Perform partial installation with using the installer in [DifferenceInstaller] folder.
- In case that newly installing OMApp.
Perform complete installation with using the installer in [Installer] folder.
If upgrading OMApp, use the installer in [DifferenceInstaller] folder to keep the customized setting.
- Folder configuration
+ [OMApp]
+ [OMAppInstaller]
+ [DifferenceInstaller]
- InstallOMApp.bat (OMApp installer)
- INSTALL_xx.txt (installation procedure)
+ [Installer]
- InstallOMApp.bat (OMApp installer)
- INSTALL_xx.txt (installation procedure)
+ [OMAppUninstaller]
- UnInstallOMApp.bat (OMApp uninstaller)
- UNINSTALL_xx.txt (uninstallation procedure)
- Readme.txt (this document)
- Installation procedure
Refer to the installation procedure document (INSTALL_xx.txt) in [DifferenceInstaller] folder or [Installer] folder.
Uninstallation procedure
Refer to the uninstallation procedure document (UNINSTALL_xx.txt) in [OMAppUninstaller] folder.
2.Machine
1) Turn on the power of the machine.
2) Make the following settings.
-Enabling the operator maintenance mode
Set '1' in the following service mode setting to enable the operator maintenance mode.
COPIER > OPTION > BODY > OPEMANT (level 2)
0: Disabled (default)
1: Enabled
-Turning on/off the port for imagePRESS Server asynchronous communication
:When connecting the external controller and this equipment with the cross cable, set '1' in the following service mode;
Service mode > COPIER > OPTION > BODY > STS-PORT (level 2)
0: OFF (default)
1: ON
1-6
T-1-7
T-1-8
T-1-9