Additional Call Features; Using Autodial Transfer - Nortel 1140E User Manual

Additional call features

Contact your system administrator to determine if the following call
features are available on your telephone.
• "Using AutoDial Transfer" on page 97
• "Using the Buzz signal" on page 98
• "Using Call Page Connect to make an announcement" on page 98
• "Using Centrex/Exchange Line Switchhook Flash" on page 99
• "Charging a call or charging a forced call" on page 100
• "Using Enhanced Override" on page 103
• "Using Forced Camp-on feature" on page 104
• "Overriding a busy signal" on page 105
• "Using Privacy Release" on page 105
• "Using Radio Page" on page 106
• "Using Voice Call" on page 108

Using AutoDial Transfer

Use the AutoDial Transfer feature to transmit digits through your AutoDial
key to the Central Office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call from or to a CO that offers
Centrex or exchange line-type features.
To use AutoDial Transfer when picking up an incoming trunk call:
CentrexSHF
Autodial
Centrex Switchhook Line
1. Press the
Flash
key and wait for an interrupted dial
tone.
AutoDial
2. Press the
number desired.
Additional call features
key to call the
97