Configuring Options; Changing Display Settings - Nortel 1140E User Manual

Configuring options

Note: Many of the options discussed in this section are for
administrator use only. Do not make any changes unless instructed
by an administrator.
Your IP Phone 1140E has both local and server-based options. The local
options cover the following entries in the Tools menu:
• "Changing display settings" on page 51
• "Changing preferences" on page 53
• "Viewing network configuration" on page 55
• "Using network diagnostic tools" on page 55
• "Viewing Ethernet statistics" on page 55
• "Viewing IP networks statistics" on page 55
• "Viewing network configuration information" on page 55
• "Viewing USB device information" on page 55

Changing display settings

Use the Contrast tool to alter the physical settings of the display. Use the
Sleep tool to control how long the display remains lit if the phone is
inactive.
To adjust Contrast or Sleep settings:
(Services)
(Services)
Services
1. Press the
Tools
the menu.
Configuring options
key twice to open
51