Chicco 06626 Instructions For Use Manual page 34

ily in transmitter mode of images and
sounds) switch off.
A long beep will be heard when
switching the parent unit on and off.
Volume adjustment + - of the parent
unit loudspeaker
The + (5a),- (5b) volume adjustment
buttons (6) regulate the volume of
sounds emitted by the Baby unit.
Press + (5a) and – (5b) to regulate par-
ent unit loudspeaker (6) volume and
select the desired level.
The unit offers up to 10 volume set-
ting levels. The factory set volume
level is 5.
Press the "+" button (5a) to increase
one level.
Press the "-" (5b) button once to de-
crease one level.
The change in the volume level will be
shown on the display (4)
The device stores the volume level se-
lected during previous use in its mem-
ory, even after it has been switched off
and switched back on.
Note: The volume adjustment icon
includes 5 notches: each notch lights
up after 2 presses of the + (5a)/- (5b)
button.
A beep will be heard each time volume
is increased or decreased by a level.
A double beep will be heard each time
the maximum or minimum level is
met.
Brightness adjustment of the parent
unit
Press the brightness adjustment
button (15) and the LCD display (4)
brightness will vary cyclically by one
level. It is possible to select up to 7
brightness levels.
Voice Activation function
The parent unit (primarily in transmit-
ter mode of images and sounds) can
function in continuous mode (OFF)
or in voice activation mode (ON) (7).
When the intensity of the sounds de-
tected by the microphone (6) on the
Baby unit exceeds the threshold for
voice activation set by the manufac-
turer, the image of the baby is shown
in real time on the display (4) and the
loudspeaker (6) on the parent unit
(primarily in transmitter mode of im-
ages and sounds) is activated. In the
presence of sounds with intensity less
than this threshold, the LCD display
(4) interrupts image visualisation of
the baby and the loudspeaker (6) on
the parent unit (primarily in transmit-
ter mode of images and sounds) is
deactivated. When this function is set,
icon is shown on the display
the
(4).
Parent unit portability
The parent unit is equipped with a
useful belt hook (11) for carrying it
around.
You can carry the parent unit with you,
using the support cord (not included),
to be inserted in the hole (12).
Luminous and acoustic operating sta-
tus indicators:
• The power and link indicator light (8)
supplies 3 different pieces of informa-
tion:
- Indication that the device is on and
properly connected to Baby unit:
the indicator light (8) will light up
steady green.
- Indication of loss or absence of link
with the Baby unit:
34
th
gre
tim
age
app
2 c
hea
As
bee
wil
ligh
NO
on,
wit
cat
disp
is e
-Ind
the
• Th
sta
fere
-Ind
ter
ligh
flas
(4)
a b
If y
dev
rec
oth
ing
ion
ma
pow
Wh
swi
-Ind
ter
beg
on
the