Front Panel Displays, Controls, Push-Buttons And Jack - McIntosh D1100 Owner's Manual

INPUT Control used to
select a source for listening
and recording. The control is
also used to enter the TRIM
or SETUP Modes and select
the various functions
Meter indicates the
Left Channel Output
of the Preamplifier
Connection for low impedance
dynamic headphones, for private
listening
12
IR Sensor receives
commands from a
Remote Control
OUTPUT 1 and 2 Push-buttons
with indicators, switch the
Preamplifier Outputs 1 and 2
On or Off

Front Panel Displays, Controls, Push-buttons and Jack

INFORMATION DISPLAY indicates
the Sources, Volume, other Audio
Settings, Operational Functions and
Setup Mode Settings
MUTE Push-button mutes
the audio from the Loud-
speakers and Headphones
Meter indicates the
Right Channel Output
of the Preamplifier
VOLUME Control allows ad-
justment of the listening level
for both channels. Also used
to change the various TRIM
and SETUP Functions
STANDBY/ON Push-button
with indicator, switches the
D1100 ON or OFF (Standby) and
resets the microprocessors