Front Panel Displays, Controls, Push-Buttons And Jack - McIntosh C2300 Owner's Manual

INPUT Control selects
the desired audio signals
for listening and record-
ing. It is also used in the
setup mode for various
METER indicates
functions
the Preamplifier's
Left Channel relative
Output Level
Connection for low im-
pedance dynamic head-
phones with 1/4" (0.64cm)
stereo phone type plug,
for private listening
TONE BYPASS with
indicator, when activated
the audio signal bypass-
es the Tone Controls
10
IR Sensor receives DISPLAY indicates the Sources, Volume,
commands from a other Audio Settings, Operational Func-
Remote Control tions and Setup Mode Settings
TRIM SELECT allows selection
of various types of audio settings.
It is also used in the setup mode
for various functions
MONO with in- SETUP Mode Push-button
dicator, combines with indicator, allows the
the Left and Right changing of the default
Channel signals for settings for Inputs, Levels,
Monophonic Sound Special Functions and the
Display
REC MONITOR Push-but-
ton with indicator, allows
listening to the playback of
REC/SRVR Source while
the recording is in process

Front Panel Displays, Controls, Push-buttons and Jack

METER indicates the
Preamplifier's Right
Channel relative Output
Level
TRIM ADJUST allows
adjustment of various types
audio settings. It is also
used in the setup mode for
various functions
OUTPUTS 1 and 2 Push-buttons
with indicators, allow the C2300
to switch Power Control and Au-
dio to two separate Stereo Power
Amplifiers
MUTE Push-button
with indicator,
activates different
Muting Modes
VOLUME Control ad-
justs the listening level
for both channels
STANDBY/ON Push-button
switches the C2300 ON or
OFF (Standby) and resets the
microprocessors