McIntosh D100 Connection Diagram

Digital preamplifier

Hide thumbs Also See for D100:

Download this manual See also: Owner's Manual

D100 Digital Preamplifier connection to a Power Amplifier Diagram

Note: Refer to the D100 Owner's Manual page 9 for additional connection information.

Connection Legend:

Data Cable*-

Digital Signal Cable -

Sensor/Keypad Cable -

RS232 Cable -

Power Control Cable* -

Ground Wire -

Audio Signal Cable -

AC Power Cords -

Video Signal Cable -

Loudspeaker Cable -

RF Signal Cable -

2 conductor shielded with 1/8 inch stereo mini phone plug on each end.

SACD/CD Player

AM/FM Tuner

Connect to AC Outlet

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

Connect to AC Outlet

Connect to

AC Outlet

Sensor

Part No. 04142000

Power Amplifier

6.6

Connect to AC Outlet

Computer

Page 1 D100 Digital Preamplifier connection to a Power Amplifier Diagram Note: Refer to the D100 Owner’s Manual page 9 for additional connection information. Connection Legend: Power Amplifier Data Cable*- Digital Signal Cable - Sensor/Keypad Cable - RS232 Cable - Power Control Cable* -...
Page 2 D100 Digital Preamplifier connection to a Analog Preamplifier Diagram Note: Refer to the D100 Owner’s Manual page 10 for additional connection information. Connect to AC Outlet Connection Legend: Analog Preamplifier Data Cable*- Digital Signal Cable - Sensor/Keypad Cable - RS232 Cable -...