Front Panel Displays, Controls, Push-Buttons And Jack - McIntosh MA7200 Owner's Manual

INPUT Control used to
select a source for listening
and recording. The control is
also used to enter the TRIM
or SETUP Modes and select
the various functions
Connection for low impedance
dynamic headphones, for private
listening
OUTPUT 1 and 2 Push-buttons with
indicators, switch Preamplifier Output
(Loudspeakers) 1 and 2 On or Off
16
LED indicates when the Left
Channel Amplifier POWER
GUARD circuit activates
Meter indicates the
Left Channel Output
of the amplifier
INFORMATION DISPLAY
indicates the Sources, Volume,
other Audio Settings, Operational
Functions and Setup Mode
Settings

Front Panel Displays, Controls, Push-buttons and Jack

LED indicates when the Right
Channel Amplifier POWER
GUARD circuit activates
USB 35%
DSD256
TONE Push-button with in-
dicator, when deactivated the
audio signal bypasses the Tone
Settings
IR Sensor receives
commands from a
Remote Control
VOLUME Control allows ad-
justment of the listening level
for both channels. Also used
to change the various TRIM
and SETUP Functions
Meter indicates the
Right Channel Output
of the amplifier
STANDBY/ON Push-button with indica-
tor switches the MA7200 ON or OFF
(Standby) and resets the microprocessors
MUTE Push-button mutes the
audio from the Loudspeakers
and Headphones