McIntosh D1100 Connection Diagram

Digital preamplifier input and control connections diagram (when used as a dac with an analog only preamplifier)

Hide thumbs Also See for D1100:

Download this manual

Note: Refer to the D1100 Owner's Manual page 8 for additional connection information.

Connection Legend:

Data Cable*-

Digital Signal Cable -

Sensor/Keypad Cable -

RS232 Cable -

Power Control Cable* -

Ground Wire -

Audio Signal Cable -

AC Power Cords -

Video Signal Cable -

Loudspeaker Cable -

RF Signal Cable -

2 conductor shielded with 1/8 inch stereo mini phone plug on each end.

Media Server

AM/FM Tuner

SACD/CD Transport

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

D1100 Digital Preamplifier Input and Control Connections Diagram (when used as a DAC with an Analog only Preamplifier)

Part No. 04172100

Analog Preamplifier Controller

TO TUBE PREAMPLIFIER

RIGHT INPUT

Connect to

AC Outlet

Digital Audio Player

WLAN ANT 1

TO TUBE PREAMPLIFIER

LEFT INPUT

Computer

WLAN ANT 2

Page 1 D1100 Digital Preamplifier Input and Control Connections Diagram (when used as a DAC with an Analog only Preamplifier) Note: Refer to the D1100 Owner’s Manual page 8 for additional connection information. Connection Legend: Analog Preamplifier Controller Data Cable*- Digital Signal Cable -...
Page 2 D1100 Digital Preamplifier Input and Control Connection Diagram (when used as a stand alone Preamplifier) Note: Refer to the D1100 Owner’s Manual page 9 for additional connection information. Turntable with Moving Coil Cartridge Connection Legend: Data Cable*- Digital Signal Cable -...