Chapter 4: Maintenance
82
•
When cleaning rollers, use an emulsiclean wipe and
allow the rollers to dry completely before scanning.
•
When cleaning tires, use a slightly damp staticide wipe
and allow the tires to dry completely before scanning.
•
In addition to the recommended cleaning supplies,
you may use a vacuum cleaner to remove debris from
the scanner.
•
If a difficulty persists after performing the
maintenance recommended in this manual, call
Scantron Customer Support as described in
"Requesting Support" on page 125.
Scantron iNSIGHT 20 Scanner