Attaching The Output Tray And Output Tray Extender; Attaching The Output Tray (For Use In The 25 Degree Position); Attaching The Output Tray Extender - Scantron iNSIGHT 20 Operator's Manual

Attaching the Output Tray and Output Tray Extender

Operator's Guide
This section covers attaching the output tray and output
tray extender. For information on how to adjust them, see
"Adjusting the Output Tray and Output Tray Extender"
starting on page 27.
Attaching the Output Tray (for use in the 25 degree
position)
The output tray should not be used when scanning
NOTE:
in the 60 degree position. See "Output Tray Extender
Flat" on page 28 for the recommended setup for the
60 degree position.
The scanner can be used without the output tray
NOTE:
when scanning a few (five or less) sheets.
Slide the output tray along the center guide underneath
the scanner platform as shown below:

Attaching the Output Tray Extender

For larger scanning jobs, using the output tray extender is
recommended.
Chapter 3: Installation
Attaching the Output Tray and Output Tray Extender
45