Cleaning The Rollers And Transport - Scantron iNSIGHT 20 Operator's Manual

Chapter 4: Maintenance

Cleaning the Rollers and Transport

Cleaning the Rollers and Transport

Do not use the emulsiclean
wipe on the gray foam tires
90
If a transport cleaning sheet does not clean the transport
area sufficiently, use the following procedure:
1.
With an emulsiclean wipe (part number 137 4966),
wipe the white plastic and red rubber rollers from side
to side. Rotate the rollers to clean the entire surface.
Use the emulsiclean wipe only on the white
CAUTION:
plastic rollers. Do not use the emulsiclean wipe on
the gray foam tires as they will absorb moisture
and need to dry before use.
Emulsiclean wipes contain sodium lauryl
IMPORTANT:
ether sulfate which can cause eye irritation. See
"Material Safety Data Sheets (MSDS)" on page 86
for information on how to obtain the MSDS.
2.
Dry the rollers with a lint-free cloth such as a dry
emulsiclean wipe. Do not use a paper towel as this will
introduce dust into the transport area.
Scantron iNSIGHT 20 Scanner