Honeywell 5704 Operating Instructions Manual page 27

MAN0448_Issue 13_01-2010
005704-M-5001 A03249
CHAPTER 2 - SySTEM DESCRIPTION
5.2.3 Quad Relay Card Front Access Connections
0V Input
Remote Inhibit
Analogue CH4
Analogue CH2
Analogue 0V
Channel 4 (NS)
Channel 4 (01)
Channel 4 (S)
Channel 2 (NS)
Channel 2 (01)
Channel 2 (S)
Ground
Rl4-NO (Master A3)
Rl4-COM (Master A3) 10
Rl3-NO (Master A2)
Rl2-NO (Master A1)
Rl2-COM (Master A1) 4
Rl1-NO (Master Fault) 2
1. NC = Normally Closed. NO = Normally Open. COM = Common.
2. Relay contact conditions refer to the no power state of the relay.
3. The functions shown for terminals 1 to 12 are the default functions for
relays RL1 to RL4 only. For other configurations - refer to the configuration
printout.
36
34
32
30
28
26
24
22
20
18
16
14
12
8
6
2-13
5704 Control System
label for
User Terminal
Reference
35 +24V Input
33 Remote Reset
31 Analogue CH3
29 Analogue CH1
27 Analogue 24V
25 Channel 3 (NS)
23 Channel 3 (01)
21 Channel 3 (S)
19 Channel 1 (NS)
17 Channel 1 (01)
15 Channel 1 (S)
13 Ground
11 Rl4-NC (Master A3)
9 Rl3-COM (Master A2)
7 Rl3-NC (Master A2)
5 Rl2-NC (Master A1)
3 Rl1-COM (Master Fault)
1 Rl1-NC (Master Fault)
Slot location label