Camos CM-800D Instruction Manual page 6

• DSUB ANALOG
PICTURE
PICTURE BRIGHTNESS
COLOR CONTRAST
SETUP H POSITION
SOUND V POSITION
PHASE
PIXEL FREQ.
* With VOL▶, go to SUB MENU. After adjusting in SUB MENU, press MENU to exit.
1) BRIGHTNESS Adjust the brightness of DSUB ANALOG without affecting AV/ S-VIDEO's
brightness.
2) CONTRAST Adjust the contrast of DSUB ANALOG without aff ecting AV/ S-VIDEO's con-
trast.
3) H POSITION Adjust the horizontal position of the image.
4) V POSITION Adjust the vertical position of the image.
5) PHASE Remove the noises. When phase value is wrong, the image has vertical
lines especially in 1 dot on and off .
6) PIXEL FREQ. Adjust the sampling frequency of DSUB analog signal.
COLOR
The tone of color can be changed from red-dish white to bluish white.
The individual color components are also user customizable.
PICTURE 9300K 7300K
COLOR
SETUP RED
GREEN
BLUE
* With VOL▶, go to SUB MENU. After adjusting in SUB MENU, press MENU to exit.
The color temperature could be changed based on the lcd specification.
1) 9300K Change color temperature : Red 42 Green 52 Blue 50
2) 7300K Change color temperature : Red 51 Green 46 Blue 46
3) 6500K Change color temperature : Red 40 Green 54 Blue 54
10
4) USER User customizable. (RED, GREEN, BLUE)
75 - +
50 - +
50 - +
50 - +
14 - +
100 - +
6500K USER
50 - +
50 - +
50 - +
DISPLAY MODES
For the display modes listed below, the screen image has been optimized during manu-
facture.
Horizontal Vertical
MODE Resolution
Frequency(KHz) Frequency(Hz)
720 x 400 31.469 70.087
VGA 640 x 480 31.469 59.940
640 x 480 37.500 75.000
800 x 600 37.880 60.300
SVGA
800 x 600 46.875 75.000
RECALL
4 Displays present status and volume level.
AUTO PIC
Select DYNAMIC, NORMAL, MILD, USER for PICTURE
5
TV/AV
Select DSUB ANALOG, EXTERNAL VIDEO, S-VIDEO
6
MUTE
7
• It is a function of Mute control. When you push MUTE button,
OSD display this image. This image can be toggle.
OSD MESSAGE
8
1) The screen shows this when signal is out of range.
OUT OF RANGE
2) The screen shows this when there is no signal.
NO SIGNAL
3) The screen shows this when the signal cable is not
CHECK CABLE
connected.
Pixel Clock Sync Polarity
Frequency(MHz) (H/V)
28.322 - / +
25.175 - / -
31.500 - / -
40.000 + / +
49.500 + / +
11