Related Manuals for Hayward TRIVAC 700
Summary of Contents for Hayward TRIVAC 700
- Page 1 TRIVAC 700 Pressure Pool Cleaner owners manual Hayward Pool Products 620 Division Street | Elizabeth, NJ 07201 www.Hayward-Pool.com...
-
Page 2: Carton Contents
SAFETY FACTS CARTON CONTENTS DO NOT use to remove large debris in new pools. REMOVE the cleaner before chemically shocking your pool DO NOT swim with cleaner Store the cleaner in a shaded safe area Hoses must be stored straight. DO NOT coiled the hose Keep away from childrens and pets REMOVE cleaner when performing backwash REMEMBER safety first... -
Page 3: Preparing The Pool
PREPARING THE POOL CONNECTING THE TRIVAC Manually remove very large and INSTALLING WALL FITTING excessive debris from pool (ie. post storm, spring cleaning / pool opening situations). When installing or re- Perform a backwash, clean your installing the universal filter, skimmer baskets and pump wall fitting use Teflon tape basket. -
Page 4: Sizing Pressure Hose
SIZING PRESSURE HOSE DEBRIS BAG SIZING THE HOSE ATTACHING DEBRIS BAG Pull hose to farthest point of the pool. “CLIC” dedicated line dedicated line dedicated line farthest point farthest point farthest point REMOVING DEBRIS BAG Measure from end of the hose to Pull the top of the debris bag frame 2-3 ft over the edge of the pool. -
Page 5: Setting Pressure
SETTING PRESSURE OPERATING THE TRIVAC CHANGING BOTTOM TO SKIM Too much pressure will cause poor cleaning and To skim the pool surface rotate the premature wear of cleaner switch to the arrow up for the SKIM parts. mode. 25 PSI (+/- 5) SWITCH Use a flat blade screwdriver to... -
Page 6: Maintenance
ADJUSTING THE SWEEP HOSE MAINTENANCE REMOVE CLEANER FROM POOL ADJUSTING SWEEP HOSE POWER SWEEP HOSE MOVE SLOWLY OR NOT AT ALL: turn the adjustment knob counter-clockwise to increase sweep hose power. SWEEP HOSE FREQUENTLY SPRAYS OUT OF THE POOL: turn the adjusment knob clockwise to reduce sweep hose power. -
Page 7: Replacing Parts
REPLACING PARTS TROUBLESHOOTING SWEEP HOSE FOR TECHNICAL ASSISTANCE If a hole forms in the sweep hose, it should CALL: 1-800-227-1477 be replaced. Unscrew the mender nut from the hose and pull the sweep hose off the PROBLEM CAUSE SOLUTION cleaner connector. Attach a new sweep hose to the cleaner connector. -
Page 8: Warranty
Authorized Service Center. For assistance on your nearest Hayward Authorized Service Center please visit us at www.hayward-pool.com. Hayward shall not be responsible for cartage, removal, repair or installation labor or any other such costs incurred in obtaining warranty replacements or repair. - Page 9 Hayward Pool Products 620 Division Street | Elizabeth, NJ 07201 www.Hayward-Pool.com...