Liko Sabina SeatStrap
Instructions for Use
Intended Use
SeatStraps are intended for use in following environments:
Health care, Intensive care, Emergency ward, Rehabilitation,
Habilitation environment and home healthcare environment.
The SeatStrap is placed under the seated patient to help raise
the patient. It supports the patient's lower body to help the
patient to the standing position. This prevents the support
vest from sliding up, which could cause pressure under the
arms.
In this document, the person being lifted is referred to as the patient and the person helping is referred to as the caregiver.
IMPORTANT!
Lifting and transferring a patient always involves a certain level of risk. Read the instructions for use for both the patient
lift and lifting accessories before use. It is important to completely understand the contents of the instructions for use.
The equipment should only be used by a trained caregiver. To be trained, a caregiver needs to read and understand the
Instructions of Use. Ensure that the lifting accessories are suitable for the lift used. Exercise care and caution during use.
As a caregiver, you are always responsible for the patient's safety. You must be aware of the patient's ability to make it
through the lifting situation. If something is unclear, contact the manufacturer or supplier.
7EN161103 Rev. 4
ENGLISH 2024
Product Description
The plastic reinforcement makes it easier to apply
the SeatStrap under the seated patient. The plastic
reinforcement is inserted into the pocket on the bottom of
the SeatStrap.
Suitable Lifts
Sabina SeatStrap is designed for use only with Liko Sabina
sit-to-stand lifts with the Sabina SeatStrap SlingBar. The
SeatStrap is always used with one of Liko support vests.
Need help?
Do you have a question about the Sabina SeatStrap and is the answer not in the manual?
Questions and answers