Power Vent Kits For Sidewall Venting - State Water Heaters SBD71120 Service Handbook

POWER VENT KITS FOR SIDEWALL VENTING

SBD model water heaters can be used with
power vent kits for sidewall venting. State
Water Heaters offers power vent kits for
use on installations with a maximum of 100
equivalent feet of vent piping. The power
vent kits also use type B vent materials.
When power venting, specific exterior
clearances must be maintained, as outlined
in the National Fuel Gas Code. (NFPA 54,
ANSI A223.1, sec 7.8)
Servicing should only be performed by a Qualified Service Technician 5