Specifications, General Requirements, and Operating
haracteristics
Specifications
Specications (listed in able 1-1) are the performance standards or limits against which
the instrument is tested. Specications apply from +20 C to +30 C (unless otherwise
noted), and only after the instrument's temperature stabilizes after one hour of continuous
operation. Unless otherwise noted, corrected limits are given when specications are subject
to optimization with error-correction routines.
General equirements
General requirements (listed in able 1-2) dene specications required of the source for
proper analyzer operation.
Operating Characteristics
Operating characteristics (listed in able 1-3) are non-warranted parameters. hey are not
specications, but are typical performance parameters that most units meet from +20 C to
+30 C.
General Information 1-9