Storing And Shipping; Environment; Packing The Instrument; Returning An Instrument For Service - Agilent Technologies 8757d Operating Manual

Storing and Shipping

Environment

Store or ship the instrument in environments within the following limits:
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
emperature
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
Altitude
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
Humidity
Protect the instrument from temperature extremes, which can cause internal condensation.

Packing the Instrument

Hardware
If the analyzer has handles, but no rack mounting hardware, go to \Packaging."
If the instrument has neither rack mount anges, nor handles, attach the handles, and go to
\Packaging."
If the instrument has handles
handles, and go to \Packaging."
If the instrument has rack mount anges, but no handles, remove the anges, attach the
handles, and go to \Packaging."
Packaging
Containers and materials identical to those used in factory packaging are available through
Agilent echnologies oces (see chapter 1 for ordering information). If you choose to package
the instrument with commercially available materials, follow these instructions.
1. Wrap the instrument in heavy paper.
2. Use a strong shipping container. A double-wall carton made of 350-pound test material is
adequate.
3. Use enough shock-absorbing material (3 to 4 inch layer) around all sides of the instrument
to provide a rm cushion and prevent movement inside the container. Protect the control
panel with cardboard. Seal the shipping container securely.
4. Mark the shipping container \FRAGILE".
eturning an Instrument for Service
If your analyzer requires service, contact the Agilent oce nearest you for information on
where to send it. See able 1-5. Include a service tag (located at the end of this chapter), on
which you provide the following information:
1. Your company name and address (do not give a post oce box).
2. A technical contact person within your company, and the person's complete phone number
including country code and area code.
3. he complete model and serial number of the instrument.
4. Indicate the type of service required (calibration or repair).
5. A detailed description of the problem and how the instrument was being used when the
problem occurred (such as calibration or measurement).
2-20 Installation
rack mount anges, remove the anges, reattach the
and
0 0
40 to + 70 C ( 40 to + 167 F)

15,240 metres (50,000 feet)
90% at +65 C (+149 F)