Cooling Fan - Vulcan-Hart VC5ED Service Manual

VC5ED FULL SIZE ELECTRIC CONVECTION OVEN - REMOVAL AND REPLACEMENT OF PARTS
Fig. 20
3. Reverse procedure to install new bulb.
Lamp Assembly Replacement
1. Remove racks in cavity.
2. Pull lamp cover off.
3. Remove RIGHT SIDE REAR PANEL.
Insert screw driver and push lamp assembly out
into cavity.
F45652 (0217)
4. Disconnect wires.
5. Reverse procedure to install new lamp assembly.
1. Remove RIGHT SIDE FRONT PANEL.
NOTE: If right side - front panel is not accessible, this
component can be serviced by removing the
CONTROL PANEL.
2. Remove wire nuts from fan wire connections.
Page 12 of 31
Fig. 21

COOLING FAN

Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.