Door Removal; High Limit Thermostat; Interior Lights - Vulcan-Hart VC5ED Service Manual

VC5ED FULL SIZE ELECTRIC CONVECTION OVEN - REMOVAL AND REPLACEMENT OF PARTS
Fig. 17
2. Reverse procedure to install.

DOOR REMOVAL

1. Open door to a 90° angle.
2. Lift door up off hinges to remove.
Fig. 18
3. Reverse the procedure to install the replacement
door and check oven for proper operation.

HIGH LIMIT THERMOSTAT

electrical power to the machine and
follow lockout / tagout procedures.
1. Take out racks from the oven.
Disconnect the
Page 11 of 31
2. Remove the high limit thermostat cover/mounting
plate from inside the oven cavity at the top.
Fig. 19
3. Disconnect lead wires from high limit thermostat.
NOTE: Remove the old RTV sealer from the cover
and mating surfaces inside the oven cavity and apply
new high temperature RTV sealer before installing.
4. Reverse procedure to install.

INTERIOR LIGHTS

electrical power to the machine and
follow lockout / tagout procedures.
Do not touch the Halogen lamp with bare
hands. If lamp is exposed to oil from the skin, the life
will be reduced. Ensure lamp is free from oil and dirt
before replacing.
Bulb Replacement
1. Pull lamp cover off.
2. Grasp lamp using a clean cloth and remove from
lamp assembly.
Disconnect the
F45652 (0217)