On The Surface Before A Dive; Gauge Surf Main Menu - Aqua Lung i550 Owner's Manual

ON THE SURFACE BEFORE A DIVE

There are two Gauge Surface Main screens. The first screen displays when there have been no dives yet or the
surface interval after a dive has been greater than 10 min. The second screen displays only during the first ten
minutes after a dive.
GAUGE SURF MAIN
(no dive yet or > 10 min SI)
mode is
GAUG (Gauge)
surface interval
hr:min

GAUGE SURF MAIN MENU

To view i550 logs, change settings, or switch modes you must navigate through the Surf Main Menu. Enter the
menu by pressing the ADV button. When you reach the end of the menu the i550 will return to the Gauge Surface
Main screen. You may hold the ADV button to scroll quickly through the selections. Some screens simply display
data. While other screens are lead-ins to sub menus and settings. Press the SEL button to choose menus or op-
tions from the Main Menu when available.
MAIN MENU
ALT 1
ADV
ALT 2
FLY
LOG
SET AL
SET UTIL
SET TIME
SET MODE
TOTAL DIVES
SEL
SN
to Select
an option
NOTE: The Gauge Surface Main, ALT screens, and Menu options are similar to those described previ-
ously for Dive Mode. See the Dive Surface Mode chapter for further details.
© Aqua Lung International, Inc. (2016)
max depth of
previous dive
dive #,
0 for none yet
ADV
43
GAUGE MODE
GAUGE SURF MAIN
(< 10 min post dive)
dive time of previous dive,
0 - 999 min, - - if > 999
SEL
activate backlight
Doc. 12-7840-r03 (3/28/16)