How To Use This Manual - Prochem EVEREST 650 Operating Instructions Manual

Everest 650 high pressure 1.001-145.0 everest 650 low pressure 1.001-146.0 everest 408 high pressure 1.001-151.0 everest 408 low pressure 1.001-152.0
Hide thumbs Also See for EVEREST 650:
Table of Contents

Advertisement

This manual contains the following sections:

How To Use This Manual

Safety
Installation
Operations
Maintenance & Service
Parts List
The HOW TO USE THIS MANUAL section will tell you
how to find important information for ordering correct
repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA box
is located on the inside of the front cover of this manual.
Model:
Date of Purchase:
Serial Number:
Dealer:
Address:
Phone Number:
Sales Representative:
The model and serial number of your machine is on the
side approximately where shown.
The SAFETY section contains important information
regarding hazardous or unsafe practices for this
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
The INSTALLATION section contains information on
how to properly install the unit in your vehicle.
The OPERATIONS section is to familiarize the operator
with the operation and function of the machine.
The MAINTENANCE section contains preventive main-
tenance to keep the machine and its components in
good working condition. They are listed in this general
order:
Engine
Vacuum Pump
Solution Pump
Drive Belts, Pulleys & Hub
Chemical Pump
Hoses
Vac/Exhaust Heat Exchanger
General Service Adjustments
Troubleshooting
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts lists
include a number of columns of information:
REF - column refers to the reference number on
the parts illustration.
PART NO. - column lists the part number for the
part.
PRV NO. - Reference No.
DESCRIPTION - column is a brief description of
the part.
SERIAL NO. FROM - If this column has an (*)
and a Reference number, see the SERIAL
NUMBERS page in the back of your manual. If
column has two asterisk (**), call manufacturer
for serial number. The serial number indicates
the first machine the part number is applicable
to. The main illustration shows the most current
design of the machine. When a boxed illustra-
tion is shown, it displays the older design.
NOTES - column for information not noted by
the other columns.
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement parts
numbers needed for ordering future parts.
NOTE: The part number for this manual is in the
lower left corner of the cover page.
86352170 EVEREST
How To Use This Manual
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everest 408

Table of Contents