Plastics Flammability; Texture/Glossing Of Housing; Base Tilt / Swivel Range; Movement Of Unit With Base - Philips BDL3245E/00 Service Manual

7.9

Plastics Flammability

•
All Plastics to be Flame Retardant UL 94-V0 or Better (if Display weighs less than 18kg;
UL94-V0 is OK).
•
Base / Pedestal to be Flame Retardant UL 94-HB.
•
All major plastic parts (bezel, back cover, base) need to be molded from same resin. Base /
Pedestal otherwise specified.
7.10

Texture/Glossing of Housing

•
The texture area and texture no should follow Philips make-up sheet.
•
The exterior surfaces shall have a uniform texture.
•
Philips must approve the mold texturing.
•
Detail document for texture refer to UN-D249.
•
The gloss value of texture area < = 20 gloss units.
7.11

Base Tilt / Swivel Range

•
Tilt -
•
Swivel Range -
•
Base detach -
•
Tip over -
7.12

Movement of Unit with Base

•
Base must have non-marring, non-staining feet.
•
Unit must tilt up and down with no "Stick / Slip".
•
Base must provide sufficient friction to hold unit in desired position after adjusting tilt.
7.13

Wall Mount Method

•
VESA in back-cover.
7.14

Label

•
Regulatory label / Carton label should follow Philips requirement.
•
Detail document refer to Philips Engineering Reference Book.
CLASS NO.
0.9
32"/42"/46" FHD LCD PUBLIC DISPLAY
2011-07-01
NAME SUPERS.
TY
CHECK DATE
2838 100 05424
N.A. (per commercial spec request)
0°
Should be directly disassembled from main body, so as for easy
install the Display to wall mount.
15° minimum in worst case, base dimension designed so that ID
and tip over requirements can be met.
BDL3245E/BDL4245E/BDL4645E
PHILIPS
PHILIPS ELECTRONICS INDUSTRIES (TAIWAN) LTD.-C.E.
Property of
Page 29 of 38
10
A4
MMD Confidential